APC SMC1500i Smart-UPS 1500VA with LCD 230V
The APC SMC1500i Smart-UPS 1500VA with LCD 230V is a rugged UPS packed with 1.5KVA power. The 230 Volts pure sinewave provides abundant battery backup power, so you can work through medium length power outages. It safeguards your equipment against damaging surges and spikes that travel along utility and data lines. The Smart-UPS also features automatic voltage regulation (AVR), which instantly adjusts high and low voltages to safe levels, so you can work indefinitely during brownouts and over voltages.
Cold-start capable: Provides temporary battery power when the utility power is out.
Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
High online efficiency: Reduces utlility costs, generates less heat.
LCD Status Display: Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Pure sine wave output on battery: Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
|Smart-UPS Features & Benefits|
|Boost and Trim Automatic Voltage Regulation (AVR)||Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).|
|Intelligent battery management||Maximizes battery performance, life, and reliability through intelligent, precision charging.|
|Power conditioning||Protects connected loads from surges, spikes, lightning, and other power disturbances.|
|Temperature-compensated battery charging||Prolongs battery life by regulating the charge voltage according to battery temperature.|
|Automatic restart of loads after UPS shutdown||Automatically starts up the connected equipment upon the return of utility power.|
|Automatic self-test||Periodic battery self-test ensures early detection of a battery that needs to be replaced.|
|Disconnected battery notification||Warns when a battery is not available to provide backup power.|
|Network manageable||Provides remote management of the UPS over the network.|
|Audible alarms||Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.|
|LED status indicators||Quickly understand unit and power status with visual indicators.|
|Serial Connectivity||Provides management of the UPS via a serial port.|
|USB Connectivity||Provides management of the UPS via a USB port (not available on all models).|
|Disconnected Battery Notification||Warns when a battery is not available to provide backup power.|
|User-replaceable batteries||Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)|
|Hot-swappable batteries||Ensures clean, uninterrupted power to protected equipment while batteries are being replaced|
|Predictive failure notification||Provides early-warning fault analysis ensuring proactive component replacement.|
|Resettable circuit breakers||Enables a quick recovery from overload events.|
|Battery failure notification||Provides early-warning fault analysis on batteries enabling timely preventive maintenance|
|Ajustable voltage-transfer points||Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.|
|Ajustable voltage sensitivity||Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.|
|Safety-Agency Approved||Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.|
|Output Power Capacity||900 Watts / 1500VA|
|Max Configurable Power||900 Watts / 1440VA|
|Nominal Output Voltage||230V|
|Output Voltage Distortion||Less than 5% at full load|
|Output frequency (sync to mains)||50/60Hz +/- 3Hz|
|Waveform Type||Sine Wave|
|Output Connections||(8) NEMA 5-15R|
|Nominal Input Voltage||230V|
|Input Frequency||50/60 Hz +/- 3 Hz (auto sensing)|
|Input Connections||NEMA 5-15P|
|Cord Length||1.83 meters|
|Batteries & Runtime|
|Battery Type||Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof|
|Typical recharge time||3 hour(s)|
Also find our store on Konga