Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
Provides temporary battery power when the utility power is out.
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Input Power Factor Correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Customize UPS capabilities with management cards.
Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
Provides management of the UPS via a serial port.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
LED status indicators
Quickly understand unit and power status with visual indicators.
|UPS topology||Double-conversion (Online)|
|Output power capacity||6 kVA|
|Output power||6000 W|
|Input operation voltage (min)||100 V|
|Input operation voltage (max)||285 V|
|Input frequency||40/70 Hz|
|Output operation voltage (min)||220 V|
|Output operation voltage (max)||240 V|
|Output frequency||50/60 Hz|
|Surge energy rating||600 J|
|Emergency Power Off (EPO)||Y|
|Output voltage Total Harmonic Distortion (THD)||2%|
|Noise level||55 dB|
|Audible alarm modes||Alarm when on battery, Low battery alarm, Overload alarm|
|AC outlet types||C13 coupler, C19 coupler|
|AC outlets quantity||3 AC outlet(s)|
|Ethernet LAN (RJ-45) ports||1|
|Emergency Power Off (EPO) connector||Y|
|Battery technology||Sealed Lead Acid (VRLA)|
|Battery voltage||96 V|
|Battery life (max)||5 year(s)|
|Battery recharge time||4 h|
|Automatic battery test||Y|
|International Protection (IP) code||IP20|
|Certification||CE, EN/IEC 62040-1|
|Operating temperature (T-T)||0 – 40 °C|
|Storage temperature (T-T)||-15 – 45 °C|
|Operating relative humidity (H-H)||0 – 95%|
|Storage relative humidity (H-H)||0 – 95%|
|Operating altitude||0 – 2011 m|
|Non-operating altitude||0 – 15240 m|
|Package width||590 mm|
|Package depth||790 mm|
|Package height||275 mm|
|Package weight||59 kg|