Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Automatically cuts power to idle equipment to conserve electricity.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Extendable Run Time
Additional batteries can be added to provide power to the load for an extended period of time in the event of utility supply failure.
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require battery back-up while providing surge only protection for less critical equipment
Provides temporary battery power when the utility power is out.
Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC’s Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Dataline Surge Protection
Provides protection of connected equipment from power surges on the data lines.
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
|Output power capacity||1.5 kVA|
|Output power||865 W|
|Input operation voltage (min)||156 V|
|Input operation voltage (max)||300 V|
|Input frequency||50/60 Hz|
|Output frequency regulation||50/60 Hz|
|Automatic Voltage Regulation (AVR)||Y|
|Surge energy rating||441 J|
|Hold time (min)||10 ms|
|Hold time (max)||12 ms|
|Noise level||45 dB|
|Surge protection features||Digital Subscriber Line (DSL), Fax, Modem, Network, Telephone|
|Audible alarm modes||Low battery alarm, Overload alarm|
|AC outlet types||C13 coupler|
|Power plug||C14 coupler|
|AC outlets quantity||10 AC outlet(s)|
|Number of output IEC jumpers||2|
|Battery technology||Sealed Lead Acid (VRLA)|
|Battery capacity||187 VAh|
|Typical backup time at full load||3.7 min|
|Typical backup time at half load||12.4 min|
|Battery life (max)||5 year(s)|
|Battery recharge time||8 h|
|Automatic battery test||Y|
|Replacement battery cartridge||APCRBC124|
|Certification||A-tick, C-tick, CE, GOST, GS Mark, Telepermit, TUV, REACH, PEP, EOLI, NEMKO-GS|
|Operating temperature (T-T)||0 – 40 °C|
|Storage temperature (T-T)||-15 – 40 °C|
|Operating relative humidity (H-H)||0 – 95%|
|Storage relative humidity (H-H)||0 – 95%|
|Operating altitude||0 – 9000 m|
|Non-operating altitude||0 – 15000 m|
|Sustainability certificates||RoHS, ENERGY STAR|
|Cables included||Phone (RJ-11), USB cable|
|Bundled software||PowerChute Personal Edition|
|Package width||238 mm|
|Package depth||488 mm|
|Package height||387 mm|
|Package weight||14.3 kg|
|Products per pallet||20 pc(s)|
|Products per master (outer) case||1 pc(s)|
|Nominal output voltage||230 V|
|Nominal input voltage||230 V|
|Packaging content||1x Detachable IEC Power Cord|